Beats Solo 3 Wireless headphones are known for their excellent sound quality and long battery life. However, some users encounter an issue where their Beats Solo 3 won’t turn off. If your Beats Solo 3 wireless light won’t turn off or the headset remains powered on despite pressing the button, you’re not alone.
This is a problem that can be irritating, particularly if you are attempting to save battery life or diagnose other issues. Users indicate that the power button no longer responds, and they are left with no way to shut down their device. The good news is that there are many steps you can take to resolve the problem, and most of them do not involve professional help.
This manual will guide you through the most efficient methods of resolving this problem quickly. We’ll also discuss some troubleshooting procedures for similar issues such as Beats Solo 3 won’t turn off but will charge and how to shut down Beats Solo 3 wireless correctly. By doing the following, you can take back full control over your headphones and avoid further draining of the batteries.
Why Won’t My Beats Solo 3 Turn Off?
Several factors can cause the Beats Solo 3 won’t turn off issue, including:
- A stuck or malfunctioning power button.
- A persistent Bluetooth connection preventing shutdown.
- A system glitch requiring a reset.
- A battery-related issue.
- Potential firmware bugs that need updating.
- Internal hardware issues, which may require professional repair.
Read Post: Why Won’t My MacBook Connect to Beats?
How to Turn Off Beats Solo 3?
Before jumping into advanced troubleshooting, ensure you’re turning off your Beats Solo 3 properly:
- Press the Power Button: Press and hold the power button for 1-2 seconds.
- Check for Response: The LED Fuel Gauge will go off, showing that the headset has powered off.
- Avoid Over-Holding: Pressing the power button for too long will trigger other modes such as pairing mode rather than powering off the headset.
- Try Multiple Presses: Press the power button 3 times rapidly to see if it detects.
- Use a Wired Connection: Connecting to a wired audio source sometimes causes a reset.
If your Beats Solo 3 wireless won’t shut down, try these troubleshooting steps.
1. Check and Clean the Power Button:-
A jammed power button might keep the headset from shutting down. Grime, dust, or debris might be clogging the button.
Steps to Repair:
- Press the power button several times to test for stiffness or absence of feedback.
- Use a can of compressed air to clean around the button.
- If debris is visible, carefully remove it with a toothpick or paperclip.
- Use a microfiber cloth dampened with rubbing alcohol to clean around the button.
- Try pressing the button again to turn off your Beats Solo 3.
2. Power Cycle the Headphones:-
A power cycle helps clear minor software glitches.
Steps:
- Connect your Beats Solo 3 to a charging cable.
- Press the power button for 30 seconds while it’s connected to a power source.
- Unplug the charging cord while keeping the button pressed.
- Let go of the power button when the Fuel Gauge blinks.
- Verify if your Beats Solo 3 wireless won’t turn off issue is solved.
3. Forget and Reconnect Bluetooth Connection:-
Your Beats Solo 3 can remain on due to a Bluetooth problem.
Forget Bluetooth on Mobile
- Android: Settings → Bluetooth → Tap the gear icon → Forget Device.
- iOS: Settings → Bluetooth → Tap the info icon beside Beats Solo 3 → Forget This Device.
Forget Bluetooth on PC/Mac
- Windows: Open Bluetooth settings, click on Beats Solo 3, and remove it.
- MacOS: System Preferences → Bluetooth, click X beside Beats Solo 3.
After forgetting the association, rejoin the headphones and see whether the problem continues.
4. Factory Reset Beats Solo 3:-
A factory reset returns default configurations and may correct issues related to power.
Steps:
- Press the Volume Down and Power buttons simultaneously for 10-15 seconds.
- Release both buttons when the Fuel Gauge blinks.
- Wait for one minute while the reset happens.
- Attempt to turn the headset off again.
5. Update Firmware:-
Old firmware will occasionally result in glitches. Reinstalling your Beats Solo 3 firmware could resolve the problem.
Steps:
- Plug your Beats Solo 3 into a PC with a USB cable.
- Start the Beats Updater software.
- Click through to see if your headphones need a firmware update, and install the update if needed.
- Restart the headphones and determine if the glitch is fixed.
6. Connect to a Computer:-
If your Beats Solo 3 wireless light does not turn off, plugging the headset into a PC or Mac can reset the power status.
For Windows:
- Plug in the Beats Solo 3 via USB cable.
- Wait for the connection prompt.
- Press and hold the power button for 10-15 seconds.
For MacOS:
- Plug in Beats Solo 3 using the USB cable.
- Open Finder → Activity Monitor.
- See if Beats Solo 3 is recognized.
After attempting this, remove the cable and try to power off the headphones.
7. Drain the Battery Fully:-
If nothing works, allow the battery to drain fully. Because Beats Solo 3 boasts a long battery life, this can take several hours.
Steps:
- Play music non-stop to drain the battery.
- Leave Bluetooth on to speed up battery drain.
- Turn the volume up to consume more power.
- After the Fuel Gauge goes off, recharge the headset.
- Attempt turning the headset off correctly following a recharge.
Related Post: Can Beats Solo 3 Be Tracked?
Final Thoughts
If your Beats Solo 3 wireless won’t turn off, attempt to check the power button, power cycle the headphones, forget the Bluetooth connection, update the firmware, or reset the headset in factory mode. In other instances, plugging the headset into a PC or allowing the battery to drain completely might be the most effective answer.
By doing so, you should be able to resolve your Beats Solo 3 won’t turn off or reset the problem and have continuous listening once more. Taking proper care of your headphones and keeping them updated will also assist in avoiding such problems in the future. In case you are still facing issues, you might need to get in touch with Beats Support.
Let us know in the comments if this guide was useful for you! We’d love to hear how it went and any other tips that were useful for you.
Assistance & FAQs
A. Your Beats Solo 3 will not turn off because of a jammed power button, a firmware issue, or an ongoing Bluetooth connection. Reset your headphones or update the firmware to resolve the problem.
A. To switch off your Beats Solo 3, hold down the power button for 1-2 seconds until the LED light shuts off. In case it fails to work, try a hard reset by pressing and holding Power + Volume Down buttons for 10-15 seconds.
A. If your Beats Solo 3 wireless light refuses to turn off, do a factory reset. Press the Power + Volume Down buttons simultaneously until the LED blinks. If the light persists, allow the battery to drain to zero and recharge.
A. If the power button does not work, use a wired connection or restart your headphones by holding Power + Volume Down for 15 seconds. Also, try cleaning around the button if it’s jammed.
A. If your Beats won’t turn off or reset, charge them, then press and hold the power button for 30 seconds. Unplug the charger while still holding the button, then let go.
A. If the power button doesn’t function, plug in the headphones on a PC or Mac using the USB and try to power down the headphones via the system. Alternatively, discharge the battery.
A. If your Beats Solo 3 won’t turn on but will charge, reset them by pressing Power + Volume Down for 15 seconds. If this fails, update the firmware with the Beats Updater software.
A. In order to reset your Beats Solo 3, press and hold Power + Volume Down for 10-15 seconds until the LED Fuel Gauge is flashing. This should be forcing a reboot and enabling you to shut them down.
A. If your Beats Solo Wireless 3 is stuck and won’t shut down, attempt a hard reset by pressing Power + Volume Down for 15 seconds. If this fails, drain the battery completely.
A. Yes, if your Beats won’t shut down, they will drain the battery eventually by continuing to use power. Attempt to reset them or update the firmware to fix the problem.
A. Yes, a constant Bluetooth connection can occasionally hinder the shutting-down process. Attempt to forget the device in your phone’s Bluetooth settings and then shut them down.
A. To shut off Beats wireless Bluetooth earbuds, press and hold the power button until the LED indicator light goes out. If they refuse to shut off, reset them by pressing Power + Volume Down for 10-15 seconds.
